![[image]](gifs/hp200cd.gif)
Description
A sine-wave generator capable of generating frequences from well below to well above the audible range.
| Frequency range | 5 cps to 600 kc covered in five ranges: |
|---|---|
| X1 5 cps to 60 cps | |
| X10 50 cps to 600 cps | |
| X100 500 cps to 6 kc | |
| X1000 5 kc to 60 kc | |
| X1000 50 kc to 600 kc | |
| Accuracy | ±2% including calibration error, warmup, changes due to aging of components, tubes, etc |
| Dial | 6-inch diameter calibrated over 300° of arc. 85 divisions. Total scale length, 78 inches |
| Frequency response | ±1 db entire frequency range (reference 1 kc) |
| Output | 160 milliwatts (10 volts) into 600-ohm rated load, 20 volts open circuit |
| Output balance | Better than 0.1% at lower frequencies and approximately 1% at higher frequencies |
| Internal impedance | 600 ohms. Output is balanced to ground for zero attenuation. (May be operated with one side grounded if desired) |
| Distortion | Less than 0.5% below 500 kc; less than 1% 500kc and above. Independent of load impedance. |
| Hum voltage | Less than 0.1% of rated output; decreases as output is attenuated |
| Power | 115/230 volts ±10%, 50-1000 cps, 75 watts |
Click here to go to the top of this page.