Click here to go to UPSCALE home page.
Click here to go to I Year Lab home page.

You can jump directly to a section of this specification sheet by selecting an item below and clicking the left button.


Digital Real-Time Oscilloscope


[image]

Manufacturer: Tektronix
Model: TDS 210
Cost: $ 1600 ( (1996))


Description


This is a 60 MHz bandwidth with selectable 20 MHz bandwidth two channel digitizing oscilloscope. The instrument includes control via an IEEE-488 (GP-IB) bus.

Note: sixteen of these instruments were purchased courtesy of a grant from Nortel.





Specifications


Digitizers8 bit resolution
Volts/Div Range2 mV/div to 5 V/div at input BNC
Position Range2 mV/div to 200 mV/div, ±2 V [> 200 mV/div to 5 V/div, ±50 V]
Lower Frequency Limit, AC Coupled<= 10 Hz at BNC <= 1 Hz when using a 10X passive probe
Rise Time at BNC< 5.8 ns
DC Gain Accuracy±3 % for sample or average acquisition mode
DC Measurement Accuracy±[3 % x |reading + (position x volts/div) | + (0.1 div x volts/div)]
Sample rate Range50 S/s to 1 GS/s
SEC/DIV Range5 ns/div to 5 s/div, in a 1, 2.5, 5 sequence
Sample Rate and Delay Time Accuracy±100 ppm over any >= 1 ms time interval
Internal Trigger Level Accuracy±0.2 div x volts/div within ±4 divisions from center screen
External Trigger Level Accuracy±(6 % o f settings + 40 mV)



Click here to go to the top of this page.


Operating Instructions




Click here to go to the top of this page.


keywords: nortel, electrical measurement device, frequency measurement device, period measurement device, voltage measurement device, time measurement device.


Document created December 18 1996. Original author: Phil Scolieri.
Last updated 02/07/97. Revised by David Harrison.